4G Zhaga DALI Lighting Controller
Item No.: NJ-iot307-dali
Zhaga single-lamp controller with 4G LTE Cat.1 connectivity and 0–100% DALI digital dimming. Connects directly to the cellular network without a gateway and supports two-way fixture feedback, scene switching, fault diagnosis and energy reporting.
Description
Zhaga single-lamp controller with 4G LTE Cat.1 connectivity and 0–100% DALI digital dimming. Connects directly to the cellular network without a gateway and supports two-way fixture feedback, scene switching, fault diagnosis and energy reporting.
- Connectivity and interfaces: DALI, 4G Cat.1, Zhaga, IP65
- Communication: 4G LTE Cat.1; direct cellular connection without gateway
- Connector: Zhaga
- Supply voltage: 12–24 V DC
- Input current: 30 mA maximum
- Control: Single-lamp; 0–100% DALI dimming and two-way bus communication
- Monitoring: Voltage, current, power, energy, frequency, power factor, temperature and on/off status
- Operating temperature: -20°C to +70°C
- Protection rating: IP65
- Dimensions: 81.1 × 33.9 mm
- Weight: Approximately 0.1 kg
- Compliance: RoHS compliant, as stated in the datasheet
- Optional functions: RTC, GPS, pole tilt, leakage voltage/current monitoring and presence detection
- Presence detection option: Document lists 16–18 m detection diameter and maximum mounting height 12 m; confirm sensor configuration
- Integration: Third-party platform integration supported
Specifications
Review the main configuration points for 4G Zhaga DALI Lighting Controller, including control method, network, monitoring, interfaces, and deployment fit.
- Model
- NJ-iot307-dali
- Communication
- 4G LTE Cat.1; direct cellular connection without gateway
- Connector
- Zhaga
- Supply voltage
- 12–24 V DC
- Input current
- 30 mA maximum
- Control
- Single-lamp; 0–100% DALI dimming and two-way bus communication
- Monitoring
- Voltage, current, power, energy, frequency, power factor, temperature and on/off status
- Operating temperature
- -20°C to +70°C
- Protection rating
- IP65
- Dimensions
- 81.1 × 33.9 mm
- Weight
- Approximately 0.1 kg
- Compliance
- RoHS compliant, as stated in the datasheet
- Optional functions
- RTC, GPS, pole tilt, leakage voltage/current monitoring and presence detection
- Presence detection option
- Document lists 16–18 m detection diameter and maximum mounting height 12 m; confirm sensor configuration
- Integration
- Third-party platform integration supported
Application scenarios
- DALI-compatible high-bay and wall-mounted luminaires with Zhaga connection.
- Remote single-lamp switching, dimming, scene control and energy monitoring.
Product buyer FAQ
What is 4G Zhaga DALI Lighting Controller used for?
Zhaga single-lamp controller with 4G LTE Cat.1 connectivity and 0–100% DALI digital dimming. Connects directly to the cellular network without a gateway and supports two-way fixture feedback, scene switching, fault diagnosis and energy reporting.
Which specifications should I check before ordering?
Check the listed supply voltage, interfaces, communication network and regional configuration against your project requirements. Ask NetJoin to confirm any unspecified options or differences between document revisions.
Where can I find the product datasheet?
Use Download Datasheet on this page to review the supplied product document, including installation and configuration details.
Next steps
Share quantity, interface, communication method, location, and platform requirements so the engineering team can confirm fit.