Sigfox Single Lamp Controller
Item No.: NJ-iot305S
Sigfox NEMA outdoor lighting controller with scheduled switching, 0–10 V/PWM dimming and electrical data reporting. The supplied manual lists RTC, GPS positioning, tilt/movement detection and a battery.
Description
Sigfox NEMA outdoor lighting controller with scheduled switching, 0–10 V/PWM dimming and electrical data reporting. The supplied manual lists RTC, GPS positioning, tilt/movement detection and a battery.
- Connectivity and interfaces: NEMA, Sigfox, 0–10 V, PWM, IP65
- Supply voltage: 90–265 V AC, 50/60 Hz
- Maximum load current: 4.5 A; internal relay rated 10 A
- Maximum power: ≤1000 W
- Dimming: 0–100% via 0–10 V / PWM
- No-load consumption: <2 W
- Operating temperature: -35°C to +65°C
- Protection rating: IP65
- Dimensions: 84 × 83 mm (width × height)
- Additional functions: RTC, GPS positioning, tilt/movement detection and battery
- Monitoring: Input/output current and voltage, active/apparent power, frequency, power factor, temperature and switching status
- Configuration: Confirm regional Sigfox network support and single/dual-lamp version before ordering
Specifications
Review the main configuration points for Sigfox Single Lamp Controller, including control method, network, monitoring, interfaces, and deployment fit.
- Model
- NJ-iot305S
- Supply voltage
- 90–265 V AC, 50/60 Hz
- Maximum load current
- 4.5 A; internal relay rated 10 A
- Maximum power
- ≤1000 W
- Dimming
- 0–100% via 0–10 V / PWM
- No-load consumption
- <2 W
- Operating temperature
- -35°C to +65°C
- Protection rating
- IP65
- Dimensions
- 84 × 83 mm (width × height)
- Additional functions
- RTC, GPS positioning, tilt/movement detection and battery
- Monitoring
- Input/output current and voltage, active/apparent power, frequency, power factor, temperature and switching status
- Configuration
- Confirm regional Sigfox network support and single/dual-lamp version before ordering
Application scenarios
- NEMA street light switching and dimming in supported Sigfox service regions.
Product buyer FAQ
What is Sigfox Single Lamp Controller used for?
Sigfox NEMA outdoor lighting controller with scheduled switching, 0–10 V/PWM dimming and electrical data reporting. The supplied manual lists RTC, GPS positioning, tilt/movement detection and a battery.
Which specifications should I check before ordering?
Check the listed supply voltage, interfaces, communication network and regional configuration against your project requirements. Ask NetJoin to confirm any unspecified options or differences between document revisions.
Where can I find the product datasheet?
Use Download Datasheet on this page to review the supplied product document, including installation and configuration details.
Next steps
Share quantity, interface, communication method, location, and platform requirements so the engineering team can confirm fit.